Hardware Setup
FAN: CPU Cooling Fan Connector
This 3-pins connector provides 12V power for the CPU cooling fan
which matches the pin assignment of this connector. If you enable the
Suspend Mode function in BIOS setup, this fan will stop when the
system is into the suspend mode.
Note: Make sure the pin assignment of our CPU Cooling Fan is matched
with this connector before connecting it, otherwise, you may
damage either the mainboard or the cooling fan.
JP44 – Wake-On-LAN (WOL) Header
Attach a 3-pin connector from the LAN card which supports the Wake-
On-LAN (WOL) function.
connected computer through the LAN card. (The cable should be
included with the LAN card.)
CPU Cooling Fan
Connector
(Pin Assignment)
This function lets users wake up the
JP44 Pin Assignment
1
5V
2
GND
3
SENSOR
11