Table of Contents
Advertisement
10
CPU, CHA: Cooling Fan Connectors
These 3-pins connectors provide 12V power for the CPU and chasis
cooling fans which matche the pin assignment of these connectors. If
you enable the Suspend Mode function in BIOS setup, these fans will
stop when the system is into the suspend mode.
Note: Make sure the pin assignment of our CPU Cooling Fan is matched
with this connector before connecting it, otherwise, you may
damage either the mainboard or the cooling fan.
SB-LINK – PCI Audio Card Connector
This 6-pin connector is used for plugging the PCI Audio cardÕs PCI
request/grant sideband signals connector into. Through this connector
requests for legacy DMA channel support as needed by some soundcards
are forwarded to the PCI Bus. Your soundcard package should include a
cable for this feature if it requires it (pin3 is left empty to make sure that
you can insert the connector only in one way.)
CPU, CHA Cooling Fan Connectors
(Pin Assignment)
1
2
SB-LINK Pin Assignment
5
6
Hardware Setup
3
1
4
2
Advertisement
Table of Contents
