Options - Fujitsu DL7400 User Manual

OPTIONS

User's Manual
Printer add-on options are listed below. For details, see Chapter 8.
•
Cut sheet feeder. The SF940 single-bin feeder is available as an
option. Two cut sheet feeders can be installed in front of and behind
the printer at the same time. A cut sheet feeder allows single cut
sheets and multiple-part cut sheets to be fed automatically.
•
Tractor unit. A second tractor unit may be bought as an additional
option if dual tractor feeding capability is required.
•
LAN card. A LAN card is available as a printer add-on option. A
user installable function, the LAN card can be installed only on
printer models with the Centronics parallel + USB interfaces. For
details, see Chapter 8.
•
Large paper table. The large paper table helps to increase
operability when large cut sheets are used.
Also, sheets that are output from the front are easier to keep properly
organized.
•
Large stacker. The large stacker accommodates sheets output from
the rear. It is used in continuous printing with a cut sheet feeder.
INTRODUCTION
1-3