Fujitsu DL7400 User Manual page 108

USING SETUP MODE
5-18
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
•
Underlined options are the factory defaults.
•
Asterisks identify items and options that differ for the IBM XL24E
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
MENU1 and Options
MENU2 Items
Tens value
<PG LX10>
setting for
setting
number of
lines per
page
<PG LX1> Ones value
setting for
setting
number of
lines per
page
<LFT-END>
## COLM
Description
0 LINE, 10 LINE, 20 LINE, 30 LINE 40
LINE, 50 LINE, 60 LINE, 70 LINE 80 LINE,
90 LINE
•
The LINE setting depends on the line
spacing setting 'LINE SP'.
•
When 0 LINE is set, the line spacing
value is 11.0 IN (only when both 'PG
LX10' = '0 LINE' and 'PG LX1' = '0
LINE' are set).
0 LINE, 1 LINE, 2 LINE, 3 LINE 4 LINE, 5
LINE, 6 LINE, 7 LINE 8 LINE, 9 LINE
•
The LINE setting depends on the line
spacing setting 'LINE SP'.
•
When 0 LINE is set, the line spacing
value is 11.0 IN (only when both 'PG
LX10' = '0 LINE' and 'PG LX1' = '0
LINE' are set).
Specifies the print start column for changing
the left margin. Printing starts at the position
given by this column plus your software-
specified left margin.
Column 1, 2, 3, ..., 41
User's Manual