Fujitsu DL7400 User Manual page 121

User's Manual
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
Options
HARDWRE
Items
<PROTOCL>
XON/XOF
DTR
REV-CHL
<DSR> IGNORE
DETECT
<DUPLEX> FULL
HALF
<CTS> IGNORE
DETECT
<CD> IGNORE
DETECT
<==END==>
USING SETUP MODE
Description
Indicates data transmission protocol.
The DC1 and DC3 codes are used.
The Data Terminal Ready signal is used.
The Reverse Channel signal is used.
DSR is ignored by the printer.
DSR is detected by the printer.
Simultaneous data transmission occurs in
opposite directions.
Data transmission occurs in either direction,
but not simultaneously.
CTS is ignored by the printer.
CTS is detected by the printer.
CD is ignored by the printer.
CD is detected by the printer.
Indicates the end of the HARDWRE item
list. Press the button to print the first item,
which is <PPR-OUT>.
Press the button to print the previous item.
Press the ONLINE button to reprint the
<<FUNCTION>> menu.
5-31