Models; Options - Fujitsu DL7400Pro User Manual

MODELS

OPTIONS

SF940 single-bin feeder (front）.
User's Manual

Power Supply type; 100-120V (M33334A)

Interface type; Centronics parallel + USB interfaces
Centronics parallel + RS232C serial interface
Printer add-on options are listed below. For details, see Chapter 8.
 Cut sheet feeder. The SF940 single-bin feeder is available as an
option. Two cut sheet feeders can be installed in front of and behind
the printer at the same time. A cut sheet feeder allows single cut
sheets and multiple-part cut sheets to be fed automatically.

Tractor unit. A second tractor unit may be bought as an additional
option if dual tractor feeding capability is required.

LAN card. A LAN card is available as a printer add-on option. A
user installable function, the LAN card can be installed only on
printer models with the Centronics parallel + USB interfaces. For
details, see Chapter 8.
Slot for LAN card is available.
(Centronics parallel + USB interfaces MODEL)
OPTIONS of DL7400Pro dot matrix printer
220-240V (M33334B)
Replacing stacker with large stacker is required when
SF940 is installed in rear side.
SF940 single-bin feeder (rear）.
Tractor unit (rear)
INTRODUCTION
1-3