Fujitsu DL7400 User Manual page 104

USING SETUP MODE
5-14
Table 5.3 MENU1 and MENU2 Items and Options
NOTES:
•
Underlined options are the factory defaults.
•
Asterisks identify items and options that differ for the IBM XL24E
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
MENU1 and Options
MENU2 Items
<EMULATE>
DPL24C+
XL24E
ESC/P2
<FONT>
COUR 10
PRSTG12
COMPRSD
BOLDFCE
PICA 10
CORRESP
OCR-B
OCR-A
COUR-N
COUR-B
COUR-I
N.SAN-N
N.SAN-B
N.SAN-I
Description
Select the same emulation as is selected in
your software. See the section Selecting an
Emulation in Chapter 2 for information on
selecting an emulation.
Fujitsu DL-series printers
(DPL24C PLUS command set)
IBM Proprinter XL24E printers Epson printers
using the ESC/P2 command set
NOTE: When you change the emulation, all
MENU1 or MENU2 options are reset to the
factory defaults for that emulation.
For each of the following fonts, the
recommended pitch settings are given after the
font name. When you change the font, be sure
to also change the pitch, if required.
User's Manual