Fujitsu DL7400 User Manual page 24

QUICK REFERENCE
: Operation can be performed when the printer is in this state.
— : Operation cannot be performed when the printer is in this state.
N/A: Does not apply.
Operation
Enter normal mode
Place printer offline
Place printer online
Load paper
Line feed (forward)
Unload paper to park position
(both front and rear-fed
continuous forms)
Form feed (forward)
Eject single sheets
Tear off forms
(continuous forms only)
Micro feed (backward)
Micro feed (forward)
Select a paper feed direction
Select a print mode
Set/reset high impact mode
Select a paper input source
Select a gap mode
Save adjusted load positions
Select MENU1 or MENU2
Clear print buffer
Reset power-on defaults
Start/stop/resume printing
Resume printing after paper
QR-2
Printer Operations (Normal Mode)
Online Offline
N/A N/A
—
—
—
—
—
—
—
Required Response
Turn printer on. (Press I on the power switch.)
Press ONLINE.
Press ONLINE.
Press LOAD.
Press LF/FF within three seconds.
Press LOAD.
Press and hold LF/FF until the operation starts.
Press and hold LF/FF until the operation starts.
Press TEAR OFF. Tear off forms, then press
any button to retract forms.
Press MICRO .
Press MICRO .
Press FRONT DIR.
Press PRINT MODE.
Press HI IMPACT.
Press PAPER PATH.
Press AUTO GAP.
Press ONLINE and LOAD.
Press ONLINE and LF/FF.
Press FRONT DIR and AUTO GAP.
Turn printer off, then on.
Start: Send print command.
Stop/resume: Press ONLINE.
Press ONLINE.
User's Manual