Fujitsu DL7400 User Manual page 37

User's Manual
Open mode in which the front tractor is attached or
detached or when continuous forms are fed using
the front tractor
When you attach the optional cut sheet feeder to the front of the printer,
open the paper table and proceed as follows:
1
Open the paper table.
Slightly raise the front end of the paper table (1), then pull (2) and
lift the table (3).
2
Close the paper table.
Lower the paper table as shown in the figure below (1), then push
(2) and close (3) the table.
SETTING UP
2-7