General Information; Safety - Garland E22-36-36GMX Installation And Operation Manual

GENERAL INFORMATION

1. Check the crate for possible damage sustained during
transit. Carefully remove the unit from the crate and again
check for damage. Any damage to the appliance must be
reported to the carrier immediately.
2. The type of voltage supply that the equipment was
manufactured for at the factory is noted on the data plate
on the equipment. This type of supply must be used.

SAFETY

• A qualified person must make the installation in
accordance with the authority having jurisdiction and
local codes.
• This unit must only be operated by a qualified person. DO
NOT operate without reading this manual.
• DO NOT operate this appliance unless all service and
access panels are in place and fastened properly.
• DO NOT attempt to repair or replace any part of this
appliance unless all main power supplies have been
disconnected.
Page 6
3. Do not remove permanently affixed labels, warning or
data plates form the appliance, this may void approvals
and create a safety hazard.
The Garland E22 series complies with the standards
CSA C22.2 no. 109 – latest edition and UL197 – latest edition.
The installation and connection of this appliance must comply
with current codes. In Canada – the Canadian Electrical Code
Part 1 and in the USA – the National Electrical Code.
• DO NOT clean this appliance unless the power supply is
disconnected.
WARNING: To avoid serious personal injury:
• USE EXTREME CAUTION in setting up, operating and
cleaning these appliances to avoid coming in contact
with hot surfaces. Wear suitable protective clothing or use
proper utensils to prevent the risk of burns.
NOTE: All warning labels and markings on this appliance,
which call attention to further dangers and necessary
precautions.
Part # 4517056 Rev 3 (08/24/11)