Table of Contents
Advertisement
Quick Links
INSTALLATION
OPERATION AND
SERVICE MANUAL
G24 SERIES
GAS-OPERATED
COUNTER GRIDDLE
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS OR
LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER
IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE
CAN CAUSE PROPERTY DAMAGE, INJURY,
OR DEATH. READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT
Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent
using genuine Garland replacement parts . Garland will have no obligation with respect to any product that has been
improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation
instructions provided with the product, or any product that has its serial number defaced, obliterated or removed,
or which has been modified or repaired using unauthorized parts or by unauthorized service agents .
For a list of authorized service agents, please refer to the Garland web site at http://www .garland-group .com .
The information contained herein, (including design and parts specifications), may be superseded and is subject
to change without notice .
GARLAND COMMERCIAL INDUSTRIES
185 East South Street
Freeland, Pennsylvania 18224
Phone: (570) 636-1000
Fax: (570) 636-3903
Part # 4521357 (12/07)
Part # 4521357 (12/07)
APPLIANCE
WARNING:
GARLAND COMMERCIAL RANGES, LTD .
1177 Kamato Road, Mississauga, Ontario L4W 1X4
CANADA
Phone: 905-624-0260
Fax: 905-624-5669
PLEASE READ ALL SECTIONS OF THIS MANUAL
AND RETAIN FOR FUTURE REFERENCE .
THIS PRODUCT HAS BEEN CERTIFIED AS
COMMERCIAL COOKING EQUIPMENT AND
MUST BE INSTALLED BY PROFESSIONAL
PERSONNEL AS SPECIFIED .
For Your Safety:
Post in a prominent location, instructions to be
followed in the event the user smells gas . This
information shall be obtained by consulting
your local gas supplier .
Enodis UK LTD .
Swallowfi eld Way, Hayes, Middlesex UB3 1DQ ENGLAND
Telephone: 081-561-0433
Fax: 081-848-0041
© 2006 Garland Commercial Industries, Inc .
Page 1
Advertisement
Table of Contents
Related Manuals for Garland G24 SERIES
Summary of Contents for Garland G24 SERIES
- Page 1 Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent using genuine Garland replacement parts . Garland will have no obligation with respect to any product that has been improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation instructions provided with the product, or any product that has its serial number defaced, obliterated or removed, or which has been modified or repaired using unauthorized parts or by unauthorized service agents .
-
Page 2: Important Information
IMPORTANT INFORMATION WARNING: This product contains chemicals known to the state of california to cause cancer and/or birth defects or other reproductive harm. Installation and servicing of this product could expose you to airborne particles of glass wool/ceramic fibers. Inhalation of airborne particles of glass wool/ceramic fibers is known to the state of california to cause cancer. -
Page 3: Table Of Contents
TABLE OF CONTENTS Important Information . . . . . . . . . . . . . . . . . 2 Commissioning . -
Page 4: Model Designation
MODEL DESIGNATION MODEL DESCRIPTION G24-24GFSD 610 mm wide x 324 mm high, heavy duty counter top griddle . G24-36GFSD 914 mm wide x 324 mm high, heavy duty counter top griddle . G24-48GFSD 1219 mm wide x 324 mm high, heavy duty counter top griddle . G24-60GFSD 1524 mm wide x 324 mm high, heavy duty counter top griddle . -
Page 5: Technical Specifications
TECHNICAL SPECIFICATIONS Table A: Exterior Dimensions HEIGHT WIDTH DEPTH WEIGHT MODELS G24-24GFSD 12 .75 30 .75 G24-36GFSD 12 .75 30 .75 G24-48GFSD 12 .75 1219 30 .75 G24-60GFSD 12 .75 1524 30 .75 G24-72GFSD 12 .75 1829 30 .75 Table B: Gas Flow Rate Per Model NATURAL GAS PROPANE GAS /h ) -
Page 6: Table D: Injector Size
TECHNICAL SPECIFICATIONS continued Table D: Injector Size G20/G25 @ 20/25 mbar G31 @ 37mbar G31 @ 50 mbar (NATURAL) (PROPANE) (PROPANE) MODEL/ SECTION Injector Size Injector Size Injector Size I.D. # I.D. # I.D. # 2 .3 1 .5 1 .4 NOTE: The pressure must be measured at the pressure test nipple located on the main manifold pipe with all burners lit . -
Page 7: Introduction
. NOTE: Many parts of the griddle are made from raw steel, Your Garland dealer is well qualified to provide this service . i .e ., the griddle plate and can react with moisture forming Periodic inspections by your dealer or qualified service surface rust . -
Page 8: Installation
INSTALLATION Statutory Regulations Ventilation Air The installation of this appliance must be carried out by The area in which the appliance is installed must be a competent person and in accordance with the relevant adequately ventilated to provide air for combustion, removal regulations, standards, codes of practice and the related of products of combustion, etc . -
Page 9: Installation Procedure
INSTALLATION continued Leg Installation Where it is not practical to do this, an automatic isolation valve system shall be fitted which can be operated from a The leg channel is located on the package base . This channel readily accessible position near to the exit . must be installed when using the legs . -
Page 10: Commissioning
COMMISSIONING Minimum Flame Setting The whole of the gas installation, including the meter, should be inspected, purged and tested for soundness in 1 . Set gas tap to low “ ” position . accordance with the codes of the Country of destination . 2 . -
Page 11: Operation Instructions
OPERATION INSTRUCTIONS Operating Controls Lighting The Griddle NOTE: Ensure the gas supply to the appliance is turned “ON” . During the initial ignition cycle, air must be purged from the gas line and thus it may take one or two minutes for the pilot burner to ignite . -
Page 12: Routine Maintenance & Cleaning
ROUTINE MAINTENANCE & CLEANING General Cleaning Griddle Cleaning Painted Finishes To produce evenly cooked, browned griddle products, keep the griddle free from carbonized grease . Carbonized grease Establish a regular cleaning schedule . Any spills should be on the surface hinders the transfer of the heat from the wiped off immediately . -
Page 13: Maintenance & Servicing Instructions
MAINTENANCE & SERVICING INSTRUCTIONS Pilot Burners - Cleaning To ensure efficient and safe operation of the appliance it is recommended that servicing be carried out by a competent 1 . Remove the main burners . (Refer to the section titled person at regular intervals, the frequency of which will vary, “Main Burners - Cleaning”) . -
Page 14: Pilot Burner/Thermocouple/Spark Electrode
. Data plate ( One required per unit ) Ensure that you have the correct pilot injector before replacing . If any of the required parts are missing, contact your Garland dealer before attempting to carry out the conversion Upon completion of all the above operations, follow the section in the manual on “Commissioning”... -
Page 15: Fault Finding
FAULT FINDING PROBLEM POSSIBLE CAUSE SOLUTION Incorrect setting pressure or injector . Check setting pressure and injector . Burner flame too large . Burner flame soft - yellow tip . Insufficient primary air . Check primary aeration for blockage . Pilot burner flame too small .