Garland E22-36 Installation And Operating Instructions Manual

Garland electric teppenyaki griddle operating instructions e22-36

Advertisement

Quick Links

GARLAND ELECTRIC TEPPENYAKI GRIDDLE
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER
FLAMMABLE VAPORS OR LIQUIDS IN THE
VICINITY OF THIS OR ANY OTHER APPLIANCE.
PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.
THIS PRODUCT HAS BEEN CERTIFIED AS COMMERCIAL COOKING EQUIPMENT AND MUST BE INSTALLED
BY PROFESSIONAL PERSONNEL AS SPECIFIED.
INSTALLATION AND ELECTRICAL CONNECTION MUST COMPLY WITH CURRENT CODES:
IN CANADA - THE CANADIAN ELECTRICAL CODE PART 1 AND / OR LOCAL CODES.
IN USA – THE NATIONAL ELECTRICAL CODE ANSI / NFPA – CURRENT EDITION.
ENSURE ELECTRICAL SUPPLY CONFORMS WITH ELECTRICAL CHARACTARISTICS SHOWN ON
THE RATING PLATE.
Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent using genuine
Garland replacement parts. Garland will have no obligation with respect to any product that has been improperly installed,
adjusted, operated or not maintained in accordance with national and local codes or installation instructions provided with
the product, or any product that has its serial number defaced, obliterated or removed, or which has been modified or repaired
using unauthorized parts or by unauthorized service agents. For a list of authorized service agents, please refer to the Garland
web site at http://www.garland-group.com. The information contained herein, (including design and parts specifications),
may be superseded and is subject to change without notice.
Continuous product improvement is a Garland policy, therefore design and specifications are subject to change without notice.
Garland Commercial Industries, Inc.
185 East South Street
Freeland, Pennsylvania 18224
Phone: (570) 636-1000
Fax: (570) 636-3903
Part # 4517056 (10/04)
INSTALLATION AND

OPERATING INSTRUCTIONS

FOR THE
MODEL E22-36
Garland Commercial Ranges Ltd
1177 Kamato Road, Mississauga, Ontario
L4W 1X4 CANADA
Phone: 905-624-0260
Fax: 905-624-5669
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE, INJURY OR DEATH.
READ THE INSTALLATION, OPERATION AND
MAINTENANCE INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR SERVICING THIS
EQUIPMENT.
®
Swallowfield Way, Hayes, Middlesex
© 2004 Garland Commercial Industries, Inc.
Enodis UK LTD
UB3 1DQ ENGLAND
Telephone: 081-561-0433
Fax: 081-848-0041

Advertisement

Table of Contents
loading

Summary of Contents for Garland E22-36

  • Page 1: Operating Instructions

    For a list of authorized service agents, please refer to the Garland web site at http://www.garland-group.com.
  • Page 2: General Information

    Loading 240V 240V 208V 3.35 3.35 The E22-36-36GM(X) is for installation in non-combustible locations only. All others should be installed with the following minimum clearances from combustible material. Minimum Installation Clearances Left & Right Sides Rear 1/2” (12.5mm) 1/2” (12.5mm)
  • Page 3: Electrical Supply

    The cable is fed towards the front through the wire way. Siting: The base on which the griddle is to be sited must be capable of adequately supporting the weight of the appliance and any ancillary equipment. Once in position, check that the equipment is level, both front and back and side to side.
  • Page 4: Maintenance And Cleaning

    2. Set all griddle thermostats to 350°F (177°C). In order to allow the griddle temperature to stabilize, the thermostats must be allowed to cycle twice before taking a test reading.
  • Page 5 Part # 4517056 (10/04) Page 5...
  • Page 6 Page 6 Part # 4517056 (10/04)
  • Page 7 NOTES Part # 4517056 (10/04) Page 7...

This manual is also suitable for:

E22-36-36gmE22-36-36gmxE22-36-60gmE22-36-60gmxE22-36-45gmE22-36-45gmx ... Show all

Table of Contents