Chapter 6. Parts Listing - IBM Flex System FC3171 Installation And User Manual

Chapter 6. Parts listing

Replaceable components are of three types:
• Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
• Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself
• Field replaceable unit (FRU): FRUs must be replaced only by a trained service
For information about the terms of the warranty, see the Warranty Information
document.
The replaceable components in Table 9 are Tier 1 CRUs. If other components require
replacement, see the documentation that came with those devices for instructions.
Table 9. Replaceable components and corresponding CRU/FRU identifiers
Name of component
If other IBM Flex System components require replacement, see the following
documentation that comes with these devices:
• IBM Flex System Problem Determination and Service Guide or Hardware Maintenance
• Installation and User's Guide or Installation Guide
Note:
• The latest versions of these documents are at
• Cable requirements for the switch are described in the IBM Configuration and
© Copyright IBM Corp. 2012
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
or request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
technician.
IBM Flex System FC3171 8 Gb SAN Switch
IBM Flex System FC3171 8 Gb Pass-thru
Switch filler
Manual and Troubleshooting Guide
http://publib.boulder.ibm.com/infocenter/flexsys/information/index.jsp.
Options Guide at http://www.ibm.com/servers/eserver/xseries/cog/. See the
documentation that comes with the compute node for cable-routing information.
.
CRU/FRU identifier
• 69Y1930 (Option)
• 69Y1933 (FRU)
• 69Y1934 (Option)
• 69Y1937 (FRU)
(Tier 1 CRU)
35