Chapter 8. Parts Listing - IBM BNT Installation Manual

Chapter 8. Parts listing

Replaceable components are of three types:
v Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
v Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself
v Field replaceable unit (FRU): FRUs must be installed only by trained service
For information about the terms of the warranty, see Appendix B, "Warranty," on
page 45.
The replaceable components in the following table are Tier 1 CRUs. If other
BladeCenter components require replacement, see the following documentation
that comes with these devices:
v BladeCenter Problem Determination and Service Guide or Hardware Maintenance
v Installation and User's Guide or Installation Guide
© Copyright IBM Corp. 2009, 2010
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
or request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
technicians.
Manual and Troubleshooting Guide
Part
BNT Virtual Fabric 10Gb Switch Module for IBM
BladeCenter assembly
Serial console cable
IBM 10 Gb SFP+ small-form-factor pluggable module, SR
(850 nm)
I/O module filler, single high
CRU number (Tier 1)
46C7194
43X0510
44W4411
31R3303
39