Configuring Wireless Network Settings - Cisco CVR100W Administration Manual

Configuring Wireless Network
Configuring Basic Wireless Settings
STEP 1
STEP 2
STEP 3
Cisco CVR100W Wireless-N 300M Router Administration Guide

Configuring Wireless Network Settings

The Wireless Table in the Basic Settings page lists the settings of the four wireless
networks supported on the CVR100W.
To configure the settings for a wireless network:
Check the box for the network that you want to configure. Click the Edit button.
Configure these settings:
Enable SSID
SSID Name
SSID Broadcast
Security Mode
MAC Filter
VLAN
SSID Isolation
WMM (Wi-Fi
Multimedia)
WPS Hardware
Button
Click Save.
Check to enable the wireless network.
Enter the name of the wireless network.
Check to enable SSID broadcast.
(Read Only) See Configuring Wireless
(Read Only) See Configuring MAC
Choose the VLAN associated with the network.
Check to enable wireless isolation within the SSID.
Check to enable WMM.
Check to map the CVR100W's WPS button on the front
panel to this network.
3
Security.
Filtering.
55