Configuring Wps - Cisco CVR100W Administration Manual

Configuring Wireless Network

Configuring WPS

Configuring WPS
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N 300M Router Administration Guide
You can configure WPS on the CVR100W to allow WPS-enabled devices to more
easily connect to the wireless network.
You can get the information about WPS through the WPS light on the front panel.
WPS Successfully
Started
WPS During Startup
WPS Errors Occured
WPS Session
Overlap
WPS Enabled or
Disabled
To enable WPS on your CVR100W:
Choose Wireless > WPS. The Wi-Fi Protected Setup page appears.
From the SSID drop-down menu, choose the wireless network to enable WPS for.
In the WPS field, check Enable to enable WPS. To disable WPS, uncheck the box.
Configure the WPS on client devices in one of the following WPS methods.
• WPS Method 1
• WPS Method 2
• WPS Method 3
After you configure WPS, the following information appears at the bottom of the
WPS page: Wi-Fi Protected Setup Status, Network Name (SSID), Security.
WPS light turns on for 120 seconds.
WPS light flashes (0.5Hz) for 30 seconds.
WPS light flashes (1Hz) for 30 seconds.
WPS light flashes (0. 1 Hz) in one second and turns off
next second for 120 seconds.
WPS light is off.
3
66