Back Panel - Cisco CVR100W Administration Manual

Introduction
Getting to know the CVR100W
Cisco CVR100W Wireless-N 300M Router Administration Guide

Back Panel

WAN The WAN (Internet) port is connected to your Internet device,
such as a cable or DSL modem.
LAN (1–4) These ports provide the LAN connection to network devices,
such as PCs, print servers, or switches.
RESET The RESET button has two functions:
12VDC The 12VDC port is where you connect the supplied power
adapter (12V/0.5 A).
Power Press this button to power the CVR100W on and off.
Sleep-Mode
Light
• Reboot: If the CVR100W has problems connecting to
the Internet, press the RESET button for at least one
second but no more than five seconds with a paper clip
or a pencil tip. This is similar to pressing the reset button
on your PC to reboot it.
• Restore to Factory Defaults: If you are experiencing
extreme problems with the CVR100W and have tried all
other troubleshooting measures, press and hold in the
RESET button for more than five seconds. This reboots
the unit and restores the factory defaults. The settings
that you have previously made to the CVR100W are lost.
• Solid green when the Sleep-Mode Light Control button
is turned on and the CVR100W is operating normally.
• Flashes green when the Sleep-Mode Light Control
button is turned on, but the Internet connection has
problems.
• Off when the Sleep-Mode Light Control button is turned
off.
1
12