Configuring Inter-Vlan Routing - Cisco CVR100W Administration Manual

Configuring Network
Configuring Routing
!
CAUTION
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Cisco CVR100W Wireless-N 300M Router Administration Guide
Be careful not to introduce routing loops in your network.
To configure static routing:
Choose Networking > Routing.
In the Static Routing area, choose a route entry from the Route Entries drop-
down menu.
To delete the route entry, click Delete This Entry.
Configure the following settings for the selected route entry:
Enter Route Name
Destination LAN IP
Subnet Mask
Gateway
Interface
Click Save.

Configuring Inter-VLAN Routing

To configure inter-VLAN routing:
Choose Networking > Routing.
In the Inter-VLAN Routing area, check Enable to enable inter-VLAN routing.
Enter the name of the route.
Enter the IP address of the destination LAN.
Enter the subnet mask of the destination network.
Enter the IP address of the gateway used for this route.
Select the interface to which packets for this route are
sent:
• LAN: Click this radio button to direct packets to
the LAN.
• WAN: Click this radio button to direct packets to
the Internet (WAN).
2
36