Viewing Guest Network Status - Cisco CVR100W Administration Manual

Viewing CVR100W Status

Viewing Guest Network Status

Viewing Guest Network Status
STEP 1
STEP 2
STEP 3
Cisco CVR100W Wireless-N 300M Router Administration Guide
Dropped
Multicast
Collisions
The Guest Network Status page displays information for all wireless guests
connected to the SSID4 of the CVR100W.
Up to ten wireless guests can be allowed to simultaneously connect to the SSID4.
The default value is five. The CVR100W will block the new requests when the
number of the connected guests reaches the limitation. A warning message will
be appeared at this time.
The CVR100W limits the time (two hours) that each guest can be connected to the
SSID4. The guest connection will be terminated over the time limit. You can also
manually terminate the guest connection at any time.
To view guest network status:
Choose Status > Guest Network Status.
To manually disconnect the guest connection, click Disconnect.
The Guest Network Status table displays the following information:
Host Name
IP Address
MAC Address
Time Left
Number of received and sent packets dropped by
each SSID, and total number of received and sent
packets dropped by all SSIDs.
Number of multicast packets sent over each SSID, and
total number of multicast packets sent over all SSIDs.
Number of packet collisions reported to each SSID,
and total number of packet collisions for all SSIDs.
Name of the device connected to the SSID4 of the
CVR100W.
IP address of the connected device.
MAC address of the connected device.
Time left for the guest connection.
8
112