Back Panel; Side Panel - Cisco RV340W Quick Start Manual

USB1 and USB2
RESET

Back Panel

POWER—Toggles power to the device on or off.
12VDC (2.5A)—Power port that connects the device to the provided
12VDC, 2.5 amp power adapter.
USB 1—Type A USB port that supports flash drives and 3G/4G/LTE USB
dongles. Caution: Use only the power supply provided with the device;
using other power supplies may cause the USB dongle to fail.
Console Port—The router console port is designed for a serial cable
connection to a terminal or a computer that is running a terminal emulation
program.

Side Panel

USB 2—Type A USB port that supports flash drives and 3G/4G/LTE USB
dongles. Caution: Use only the power supply provided with the device;
using other power supplies may cause the USB dongle to fail.
Kensington Lock Slot - Lock slot on the right side to secure the device
physically, using the Kensington lock-down equipment.
Cisco RV340W Router Quick Start Guide
Off when no USB device is connected, or is
inserted but not recognized.
Solid green when the USB dongle is connected
to the ISP successfully. USB storage is
recognized.
Flashing green when sending or receiving data.
Solid amber when the USB dongle is recognized
but fails to connect to ISP (no IP address is
assigned). The USB storage access has errors.
To reboot, or reboot and restore defaults:
• To reboot the router and retain the current
configuration, press and hold RESET for 3
seconds to 10 seconds (maximum), using a
paper clip or a pen tip.
• To reboot the router and restore to the
factory default settings, press and hold in the
RESET button for more than 10 seconds.
Changes made to the original configuration
of the router are lost.
5