System Tools; Diagnostic - TP-Link TL-WR700N User Manual

To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the previous
page.
8.8

System Tools

Figure 8-20 The System Tools menu
Choose menu "System Tools", and then you can see the submenus under the main menu:
Diagnostic, Firmware, Factory Defaults, Backup & Restore, Reboot, Password, and System
Log. Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.

8.8.1 Diagnostic

Choose menu "System Tools → Diagnostic", and then you can transact Ping or Traceroute
function to check connectivity of your network in the following screen.
TL-WR700N
Figure 8-19 Add or Modify an Address Reservation Entry
150Mbps Wireless N Mini Pocket Router
- 146 -