Mac Filtering - TP-Link TL-WR700N User Manual

key of WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless
station's capability and request.
• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
Automatic (Recommended), TKIP or AES as Encryption.
• PSK Password - You can enter ASCII or Hexadecimal characters. The default password
is the last unique eight numbers of each Router's MAC address.
For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length
should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the
length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case keys will
affect the outcome. It would also be a good idea to write down the key and all related
wireless security settings.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.

8.6.3 MAC Filtering

Choose menu "Wireless → MAC Filtering", and then you can control the wireless access by
configuring the Wireless MAC Filtering function, as shown in Figure 8-10.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address - The wireless station's MAC address that you want to access.

Status - The status of this entry, either Enabled or Disabled.

TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 8-10 Wireless MAC Filtering
- 138 -