Bridge Mode - TP-Link TL-WR700N User Manual

3. Input the wireless password of the wireless network you've chosen, and then click Next.
4. The Finish page is shown as Figure 3-11. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.

3.1.3 Bridge Mode

When you choose Bridge on Working Mode page in Figure 3-2 , take the following steps:
1. Wait a few minutes when the device is detecting the surrounding wireless networks.
2. Choose the wireless network you would like to extend from the list available, and then click
Next.
TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 3-10
Figure 3-11
Figure 3-12
- 15 -