Wireless; Wireless Settings - TP-Link TL-WR700N User Manual

server in this device will not start up.
3. If the new LAN IP address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically, but the Virtual Server and
DMZ Host will not take effect until they are re-configured.

7.6 Wireless

Figure 7-7 Wireless menu
There is one submenu under the Wireless menu (shown in Figure 7-7): Wireless Settings. Click
any of them, and you will be able to configure the corresponding function.

7.6.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set

Identification) must be assigned to all wireless devices in your network. The default SSID is
set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each
Router's MAC address). But it is recommended strongly that you change your networks
name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT
the same as test.
MAC of AP - The MAC address of AP that you want to access.

TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 7-8 Wireless Settings - Client
- 117 -