Dhcp Clients List - TP-Link TL-WR700N User Manual

is up, the PC will be automatically assigned a new dynamic IP address. The range of the time
is 1 ~ 2880 minutes. The default value is 120 minutes.
Default Gateway (optional) - Enter the IP address of the gateway for your LAN. The factory

default setting is 0.0.0.0.
Default Domain (optional) - Enter the domain name of the your DHCP server. You can leave

the field blank.
Primary DNS (optional) - Enter the DNS IP address provided by your ISP. Consult your ISP if

you don't know the DNS value. The factory default setting is 0.0.0.0.
Secondary DNS (optional) - Enter the IP address of another DNS server if your ISP provides

two DNS servers. The factory default setting is 0.0.0.0.
Click Save to save the changes.

Note:
To use the DHCP server function of the device, you should configure all computers in the LAN as
"Obtain an IP Address automatically" mode. This function will not take effect until the device
reboots.

6.7.2 DHCP Clients List

Choose menu "DHCP → DHCP Clients List", and then you can view the information about the
clients attached to the Router in the screen as shown in Figure 6-13.
Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client

Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.
TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 6-13 DHCP Clients List
- 104 -