Network; Lan - TP-Link TL-WR700N User Manual

6.5 Network

Figure 6-5 the Network menu
There is only one submenu under the Network menu (shown in Figure 6-5): LAN.

6.5.1 LAN

Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on
the screen as below.
Address Type - Choosing Smart IP to get IP address from DHCP server, or choosing Static

IP to configure IP address manually.
MAC Address - The physical address of the LAN ports, as seen from the LAN. The value

cannot be changed.
IP Address - Enter the IP address of your Router in dotted-decimal notation. The factory

default is 192.168.0.254.
Subnet Mask - An address code that determines the size of the network. Usually it is

255.255.255.0.

Note:
1. If you change the LAN IP address, you must use the new IP address to login to the Router.
2. If you select the type of Smart IP (DHCP) and there is a DHCP server forward, the DHCP
TL-WR700N 150Mbps Wireless N Mini Pocket Router
Figure 6-4
Figure 6-6 LAN
- 97 -