Table of Contents
Advertisement
Chapter 2: WEB Configuration
Gateway – Network Web Page Group
1. LAN
You can activate the DHCP server function for the LAN on this page.
With this function activated, your cable company's DHCP server provides one IP address for your
gateway, and your gateway's DHCP server provides IP addresses, starting at the address you set in IP
Address on the LAN page, to your PCs. A DHCP server leases an IP address with an expiration time.
To change the lowest IP address that your gateway will issue to your PCs, enter it into the IP Address box
and then click Apply.
Fig.26
2. WAN
You can configure the optional internal DHCP server for the WAN on this page. Select different WAN
Connection Type will lead to different contents. Take the WAN connection type-DHCP for example, you
can release and renew the WAN lease by pressing the buttons.
You can enter a spoofed MAC address that causes your gateway networking stack to use that MAC
address when communicating instead of the usual WAN MAC address, e.g., if the MAC address is
00:11:e3:df:66:95, this spoofed MAC address could be 00:11:e3:df:66:97 or any desired MAC address.
30
Illustrations contained in this document are for representation only.
Hide quick links:
Advertisement
Table of Contents
