Pt2275Sw Optional Calibration Tool Install - Planar PT2275SW User Manual

PT2275SW Optional Calibration Tool Install:

If you would like to use the Optional Calibration Tool, follow the instructions below.
Please note: the calibration tool supports Windows® VISTA, XP, XP Embedded, 2000 and
ME operating systems via USB only.
1. Open the CD-ROM.
2. Select the monitor size and then model name
3. Click on the "Load Utility" button that appears to the right of the model name.
4. The HID calibration tool will automatically open.
If you are using a PC running Windows® VISTA, XP, 2000, ME, 98, NT4.0, follow the
instructions below:
1. Power on the PC
2. Be sure the USB or the RS-232 Serial cable is connected from the PC to the LCD
display
3. Open the CD-ROM.
4. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows®,XP Embedded, follow the instructions below:
Express:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF
by using the EWF Manager command.
4. Once the EWF is disabled click on the XP driver on the CD-ROM and follow the
step-by-step instructions as shown on the pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped fi le on the CD-ROM.
If you are using a PC running Windows® CE, follow the instructions below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Using Platform Builder, build an image fi le by following the step-by-step instructions
found in the zipped fi le on the CD-ROM.
If you are using a PC running Linux OS, follow the instructions below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped fi le on the CD-ROM.
20