Table of Contents
Advertisement
Touch Screen Driver Installation
The PT2275SW is available with both RS232 and USB connections. The touch driver is
located on the enclosed CD-ROM for these operating systems: Windows
64/32 bits, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux, Apple
The PT2285PW is available with USB connection. The touch driver is located on the enclosed
CD-ROM for these operating systems: Windows
XP Embedded (Express only), Linux, Apple
Please Note:
1. The PT2275SW/PT2285PW is Microsoft
compatible if you use the USB touch screen interface. No additional software driver is
required for general operation of the touch screen.
2. For PT2285PW, the system requires 15 seconds for Windows 7 to install/uninstall the touch
driver while turning power on/off or plugging/unplugging USB cable.
PT2275SW Optional Calibration Tool Install:
If you would like to use the Optional Calibration Tool, follow the instructions below. Please
note: the calibration tool supports Windows® 7, VISTA, XP, XP Embedded, 2000, 98 and ME
operating systems via USB only.
1. Open the CD-ROM.
2. Select the monitor size and then model name.
3. Click on the "Load Utility" button that appears to the right of the model name.
4. The HID calibration tool will automatically open. From here the user can choose to do
the following:
a.
4 Points Calibration
b.
9 Points Linearization
c.
25 Points Linearization
d.
Clear
e.
Draw Test
f.
Advanced. In the Advanced settings area the user may do the following:
i.
Adjust the Double Click Area.
ii.
Enable auto right click and adjust the auto right click time.
iii.
Choose to be either in the HID Mouse Mode or HID Digitizer Mode (Windows
Vista and Windows 7).
iv.
Simply click the "Apply" button once the settings are fi nalized.
®
7, VISTA 64/32 bits, XP, 2000, CE,
®
Mac OS.
®
®
Windows
HID (Human Interface Device)
23
®
7, VISTA
®
Mac OS.
®
Advertisement
Table of Contents
