Table of Contents
Advertisement
Touch Screen Driver Installation
The PT1545R/PT1545S/PT1545RPF is available with both RS232 and USB connections. The
touch driver is located on the enclosed CD-ROM for these operating systems: Windows ® 7,
VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux, Apple ® Mac OS.
Please Note: The PT1545R/PT1545S/PT1545RPF is Microsoft
Interface Device) compatible if you use the USB touch screen interface. No additional software
driver is required for general operation of the touch screen. A calibration tool can be installed
for improved touch position accuracy. See "Optional Calibration Tool Install" section for more
information.
PT1545R/PT1545S/PT1545RPF Optional Calibration Tool
Install
If you would like to use the Optional Calibration Tool, follow the instructions below. Please
note: the calibration tool supports Windows ® 7, VISTA, XP, XP Embedded, 2000, 98 and ME
operating systems via USB only.
1. Open the CD-ROM.
2. Select the monitor size and then model name.
3. Click on the "Load Utility" button that appears to the right of the model name.
4. The HID calibration tool will automatically open. From here the user can choose to do
the following:
a.
4 Points Calibration
b.
9 Points Linearization
c.
25 Points Linearization
d.
Clear
e.
Draw Test
f.
Advanced. In the Advanced settings area the user may do the following:
i.
Adjust the Double Click Area.
ii.
Enable auto right click and adjust the auto right click time.
iii.
Choose to be either in the HID Mouse Mode or HID Digitizer Mode (Windows®
Vista only).
iv.
Simply click the "Apply" button once the settings are fi nalized.
®
18
®
Windows
HID (Human
Advertisement
Table of Contents
