Sony RCP-920 Operation Manual page 70

4
Press ENTER button to enable configuration.
The cursor appears as "?" and the setting flashes.
5
Turn the right adjustment knob to change the setting
item.
6
Press ENTER button to confirm the selection.
The cursor appears as ">" again.
7
Repeat steps 3 to 6 for each switch you want to
configure.
8
Press CLEAR button.
The first screen of the RCP configuration menu
reappears.
Use the supplied function labels to relabel each switch
for which the function has been changed.
To reset the settings in the RCP
configuration menu
You can reset all the settings in the RCP configuration
menu to their default configurations.
Note
This setting can only be configured in Engineer mode.
1
Move the cursor to SETTING in the RCP
configuration menu, and press ENTER button.
The settings and adjustment screens appear.
2
Use the v and V buttons to move through the settings
and adjustment screens, and display the <ALL
RESET> page.
3
Reset the settings.
70
Initial Settings
1 Press ENTER button to enable configuration.
The cursor appears as "?" and the START? display
flashes.
2 Press ENTER button again.
OK appears, and all the settings are reset.
To cancel resetting, press CLEAR button when
START? is displayed.
Note
The resetting procedure is complete when OK
appears, and all the settings in the RCP configuration
menu will be set to their factory default
configurations.
4
Press CLEAR button.
The first screen of the RCP configuration menu
reappears.
To change adjustment knob sensitivity
You can adjust the sensitivity of the WHITE, BLACK/
FLARE, DETAIL, and BLACK GAMMA adjustment
knobs when they are used in Relative mode.
Note
This setting can only be configured in Engineer mode.
1
Move the cursor to SETTING in the RCP
configuration menu, and press ENTER button.
The settings and adjustment screens appear.
2
Use the v and V buttons to move through the settings
and adjustment screens, and display the <VR REL
MODE SET> page.
Note
The LCD can only display up to four setting items at
one time. If a page has more than four items, turn the
right adjustment knob to scroll the page.