Initial Settings; Configuring The Rcp-920/921 Operating Environment - Sony RCP-920 Operation Manual

Initial Settings

Configuring the RCP-920/921
Operating Environment
The RCP configuration menu allows you to configure
settings on the RCP-920/921 such as the internal clock,
buzzer volume, and LED and LCD brightness.
To adjust the LCD
You can adjust the brightness and contrast for the menu
display panel.
1
Move the cursor to LCD SETTING in the RCP
configuration menu, and press ENTER button.
The LCD settings screen appears.
2
Turn the left adjustment knob to adjust the brightness,
and turn the right adjustment knob to adjust the
contrast.
3
Press CLEAR button.
The first screen of the RCP configuration menu
reappears.
To customize the paint menu
You can select up to eight setting items to appear in the
paint menu.
1
Move the cursor to MENU CUSTOMIZE in the RCP
configuration menu, and press ENTER button.
The paint menu customization screen appears.
2
Turn the right adjustment knob to move the cursor to
the item you want to change.
3
Press ENTER button to enable configuration.
The cursor appears as "?" and the selected item
flashes.
4
Turn the right adjustment knob to change the setting
item.
5
Press ENTER button to confirm the selection.
The cursor appears as ">" again.
6
Repeat steps 2 to 5 for each paint menu item you want
to change.
7
Press CLEAR button.
The first screen of the RCP configuration menu
reappears.
To set the clock
The RCP-920/921 has an internal clock. Perform the
following steps to set the clock.
1
Move the cursor to SETTING in the RCP
configuration menu, and press ENTER button.
The settings and adjustment screens appear.
2
Use the v and V buttons to move through the settings
and adjustment screens, and display the <DATE/
TIME> page.
Note
The LCD can only display up to four setting items at
one time. If a page has more than four items, turn the
right adjustment knob to scroll the page.
65
Initial Settings