Weber SUMMIT 425 Step-By-Step Manual page 8

INSTALL BOTTOM
SHELVES
For the Summit 425, place the stainless steel bottom
shelves between the frame supports.
For the Summit 450, place the bottom rack under the
cart between the frame supports. Lift up one end of the
rack so it clears the crosspiece. Continue to lift until the
opposite end clears the opposite crosspiece. Set the rack
in place on both crosspieces.
Summit 425
Summit 450
Figure 16
INSTALL CONDIMENT
HOLDERS AND WORK
SURFACES
You will need: two condiment holders and two stainless
steel work surfaces.
Place the condiment holders on the ends of the frame.
Set the work surfaces on top of the condiment holders
and the barbecue frame. Figure 17.
8
Figure 17