Weber SUMMIT 425 Step-By-Step Manual page 5

ADD FUEL SCALE
FOR THE SUMMIT 450
Note:The fuel scale is already assembled on the
Summit 425.
You will need: fuel scale assembly, two 1/4-20 wing nuts
and two nylon washers.
Slip the bolts on the back of the fuel scale assembly
through the two small holes in the tank panel and right
panel. Make sure indicator rod of fuel scale is on the left
side of the wheel frame.
Add washers, then wing nuts and tighten. Figure 6.
(a)
View from back
Right panel
View from front
Figure 6
INSTALL FLAVORIZER
BARS
You will need: seven Flavorizer bars.
Set the Flavorizer bars front to back over the burners in the
slots of the Flavorizer Bar/cooking grill support. Figure 7 (a).
a)
(b)
5
Flavorizer Bar/cooking grill
support
Flavorizer Bar
Slot
Figure 7