Sharp AR-M355N Quick Reference Manual page 5

Adjustment Checklist
Note: For detailed instructions, refer to Section 8
of the AR-M355N/M455N Service Manual.
Quick Reference Guide: AR-M355N/M455N
Simulation
Entering the Simulation Mode
1. Copy mode key ON → Program key ON → Asterisk (*) key
ON → CLEAR key ON →Asterisk key ON → Ready for
input of a main code of simulation
2. Entering a main code with the 10-key → START key ON
3. Entering a sub-code with the 10-key → START key ON
4. Select an item with the scroll key and the item key.
5. The machine enters the mode corresponding to the
selected item.
a) Press START key or EXECUTE key to start
the simulation operation.
b) To cancel the current simulation mode or to
change the main code or the sub code, press
the user setup key.
*Canceling the simulation mode to return to the
normal mode:
6. Press CA key.
Simulation List
Please refer to the Simulation List (pages 1 through 10) that follows.
Adjustment and Simulation
5