Sharp AR-M355N Quick Reference Manual page 10

Digital multifunctional imager
Hide thumbs Also See for AR-M355N:
Table of Contents

Advertisement

Simulation List (Main/Sub) (cont'd)
44
14
Used to check the output level of the temperature sensor and the humidity sensor.
16
Used to check the toner concentration control data.
46
2
Used to adjust the copy density in all the copy modes (Auto, Text, Text/Photo, and Photo mode.
9
Used to adjust the print density for each density level (display value) in the copy mode (binary-Text mode). An optional print
density can be set for each density level (display value).
11
Used to adjust the print density for each density level (display value) in the copy mode (binary-Photo m ode). An optional print
density can be set for each density level (display value).
12
Used to adjust the print density into eh FAX mode (all models).
13
Used to adjust the print density in the FAX mode (each normal mode). (Only when FAX is installed.)
14
Used to adjust the print density in the FAX mode (each fin mode). (Only when FAX is installed.)
15
Used to adjust the print density in the FAX mode (each super fine mode). (Only when FAX is installed.)
16
Used to adjust the print density in the FAX mode (each ultra fine mode). (Only when FAX is installed.)
17
Used to set the gain in shading correction.
18
Used to adjust the gamma (density gradient) in the copy mode.
19
Used to set the auto mode operation specifications in ach mode (copy, scan, FAX).
20
Used to adjust the copy density correction into eh SPF copy mode for the document table copy mode. The adjustment is made
so that the copy density becomes the same as that of the document table copy mode.
21
Unused to adjust the scanner exposure level in all the scanner modes.
22
Used to adjust the scanner exposure level in the normal text mode.
23
Used to adjust the scanner exposure level in the fine text mode.
24
Used to adjust the scanner exposure level (in the super fine text mode).
25
Used to adjust the scanner exposure level in the ultra fine text mode.
27
Used to adjust the gamma (density gradient) of the network scanner mode.
31
Used to adjust sharpness of the copy mode.
Quick Reference Guide: AR-M355N/M455N
Simulation List (Pg. 5 of 10)
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar-ar-m355nAr-m335nAr-m445nAr-m455n

Table of Contents