Operating The Floppy Drive; Verifying The Floppy Drive Configuration - HP C100/110 Owner's Manual

Using Your 3.5-Inch Floppy Disk Drive

Operating the Floppy Drive

Operating the Floppy Drive
This section describes how to perform tasks with your 3.5-inch floppy disk
drive.
Verifying the Floppy Drive Configuration
To verify that your workstation can communicate with the floppy drive, use
the ioscan command in a terminal window to see which devices are cur-
rently in use on your system. The following are examples of using ioscan for
version 9.05 and version 10.0:
1 Click on the Terminal Control on the Front Panel of your Workspace.
Terminal Control
A terminal window opens.
2 Move the mouse cursor into the terminal window and click the left mouse button.
3 Enter the following at the prompt:
/etc/ioscan (for 9.05)
ioscan (for 10.0)
83