Installing Storage Devices - HP C100/110 Owner's Manual

Installing Storage Devices

This section describes how to install storage devices in your workstation.
Before installing a new storage device, perform the following procedures as
described earlier in this chapter:
•
•
CAUTION: All storage devices are susceptible to mechanical and electrostatic shock. When
handling the devices, always wear the static-grounding wrist strap that came in the
storage device kit. Always handle the drive carefully.
NOTICE: Do not use SCSI ID 7 for any of your storage devices' SCSI addresses. The
host SCSI controllers use SCSI ID 7.
Checking the SCSI IDs
Preparing Your Workstation
Changing Your Workstation's Hardware Configuration
Installing Storage Devices
119