HP C100/110 Owner's Manual page 80

Using Your Digital Data Storage (DDS) Tape Drive
This chapter describes how to perform tasks that archive to and transfer data
from the optional Digital Data Storage (DDS) tape drive. It also describes
how to maintain and care for the drive. We assume the DDS tape drive is set
to the factory default address of SCSI ID 3.
The instructions in this chapter assume you are using HP-UX version 9.05 or
later operating system with HP VUE version 3.0 or later interface.
This chapter provides information on the following:
•
•
•
•
CAUTION: Use only data cassettes labeled DDS cassettes. Never use audio cassettes labeled
DAT (Digital Audio Tape) in your DDS-format drive.
64
DDS tape drive and data cassette descriptions
Operating the DDS Tape Drive
Troubleshooting
Ordering information