Table of Contents
Advertisement
Step 18 (Rotisserie kit assembly. Option)
a) Insert two forks (KD), balance block (KF) and roller (KE) into shaft (KC) in sequence.
Step 20 (Install the rotisserie kit on grill. Option)
a)
Insert the shaft on fork side into the motor.
b)
Move the roller and put it into the slot on right side wall of
the firebox.
c)
Tighten the screw on roller by hand.
Note: Make certain the shaft will be not pulling out from the
motor during operation.
Left Side
GSF2818KM
Owner's Manual
Step 19 (Rotisserie motor installation. Option)
Take two pre-installed screws on motor support (KB) apart.
a)
Align the holes on the motor support (KB) with the hole on the left
b)
side wall of firebox.
c)
Insert one bolt, one flat washer, on spring washer and one nut into
each drilled hole and tighten by screw driver provided.
Install rotisserie motor (KA) by insert the slot on it into the motor
d)
support.
Fully Assembled View
12
Right Side
Advertisement
Table of Contents
