Light Kit - Hunter ceiling fan Installation Manual

Light Kit

Unscrew the three acorn nuts by hand
and carefully detach the globe assembly
from the shroud.
Acorn
Nut
Install a 14W CFL bulb (sold separately) into
the E27 socket. When necessary, replace with
bulb of same wattage.
MD511-01 • 05/20/14 • © Hunter Fan Company
To reinstall the globe assembly, align the posts on
shroud. Lift the globe and posts until the threaded
Install the three acorn nuts onto the posts so that
Make sure the globe assembly is securely attached to the
shroud. Failure to properly secure all three acorn nuts could
result in the light fixture falling.
16
contatobrasil@hunterfan.com
the globe assembly with the holes in the shroud.
Make sure that the chain holes in the globe
assembly also line up with the chain holes in the
end of the posts are visible through the shroud.
the light kit is secured to the shroud.
Acorn
Nut
Post