Troubleshooting; Fan Doesn’t Work; Excessive Wobbling; Noisy Operation - Hunter ceiling fan Installation Manual

Troubleshooting

Fan doesn't work
• Make sure power switch is on.
• Pull the pull chain to make sure
it is on.
• Push the motor reversing switch
firmly left or right to ensure that
it is engaged.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 12.
• Check the plug connection in
the switch housing.

Excessive wobbling

• Tighten all of the blade and
blade iron screws until they
are snug.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
MD511-01 • 05/20/14 • © Hunter Fan Company

Noisy Operation

• Tighten the blade and blade
iron screws until they are snug.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
20
contatobrasil@hunterfan.com