Wiring
Green/Yellow
Stripe
Using an orange wire
connector from
the
hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
Refer to CAUTION c.1 on pg. 2
Note: To connect the wires,
Note: To connect the wires,
hold the bare metal leads
hold the bare metal leads
together and place a wire
together and place a wire
connector over them, then twist
connector over them, then twist
clockwise until tight.
clockwise until tight.
For a Single Switch
Using the orange wire
connectors from
the
hardware bag, connect
the brown wire (ungrounded)
from the ceiling to the
brown and the black with
white stripe wires from the
fan. Connect the blue wire
(grounded) from the ceiling to
the blue wire from the fan.
12
MD511-01 • 05/20/14 • © Hunter Fan Company
For Dual Switches
Using the orange wire
connectors from
the
hardware bag,
connect the blue wire
(grounded) from the
ceiling to the blue wire
from the fan.
Connect the brown wire
(ungrounded) from the
ceiling to the brown wire
from the fan. Connect the
second (ungrounded)
wire from the ceiling to
the black with white stripe
wire from the fan.
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
contatobrasil@hunterfan.com