Light Kit - Hunter Ceiling fans Installation Manual

Light Kit

Connect the plugs from the upper and
lower switch housings. Make sure to line
up the colored markings on
the connectors.
For questions regarding removing a light kit, call
1-888-830-1326.
customer service
Switch
Housing Notch
Screw
Partially install two of the switch housing
screws found in the bag. Align the notches
in the sides of the lower switch housing with
the screws on the upper switch housing. Twist
the lower switch housing clockwise to lock
into place.
14
M0001-01 • 08/03/12 • © Hunter Fan Company
www.HunterFan.com
Install the third switch housing screw.
Tighten all three screws securely.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
1.888.830.1326