Operation Instructions - Hunter Ceiling fans Installation Manual

Light Kit (continued)
Thumb Screw
Shade
To install the shade, first loosen
the thumb screws. Raise the
shade to the light fixture. Tighten
all thumbscrews securely.
Note: In compliance with US federal energy regulations, this ceiling
fan contains a device that restricts its light output. Exceeding the
wattage limit marked on the MAX wattage sticker affixed to the
light socket(s) may result in fire hazard or improper operation.
Install the bulbs into the sockets.
When necessary, replace with
bulbs of same wattage.
M0001-01 • 08/03/12 • © Hunter Fan Company
Connect a pull chain pendant to
each of the short chains coming
from the switch housing.
Note: Glass shade style and number of lights may vary.
15
www.HunterFan.com
1.888.830.1326
See next page for fan

operation instructions.