Tools Needed; Mounting Options - Hunter Ceiling fans Installation Manual

Tools Needed

Ladder
If mounting to a support structure,
you will also need:
Screwdrivers
Wire Strippers
Pliers
9/64" Drill Bit
Power Drill
(optional) (optional)
M0001-01 • 08/03/12 • © Hunter Fan Company

Mounting Options

Flat
Angled
1
FOLD
on dotted line
Guide Touches
BOTH Ceiling & Wall
You need ONLY
a Longer
Downrod
*most common
3
CEILING 34
Use this guide to determine
which mounting option is
appropriate for your ceiling type.
skip to next page
1. You will need a Longer Downrod
sold separately
2. You may need an Angle Mounting Kit
sold separately
Use the 3 steps below to determine if
your ceiling angle is greater than 34°
2 3
PLACE
SLIDE
against wall toward ceiling
Guide Touches Wall
but NOT Ceiling
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
O