Hunter Ceiling fans Installation Manual page 5

Ceiling Bracket Installation
OFF
Make sure all four (4) bumpers
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
are still attached.
M0001-01 • 08/03/12 • © Hunter Fan Company
Use wood screw Use machine screw
(included) when securing (provided with outlet
to support structure with box) when securing to
approved electrical outlet existing ceiling fan-rated
box. Drill 9/64" pilot holes outlet box. Make sure
in support structure to aid it is securely installed
in securing ceiling bracket and is acceptable for fan
with hardware found in support of 31.8 kg (70 lbs)
the hardware bag. or less.
5
www.HunterFan.com
1.888.830.1326
For angled ceilings, point
opening toward peak.
If you are unable to do this,
call Technical Support at
1-888-830-1326.
Refer to warning w.1 on pg. 2