Removing Printing Jams - Ricoh SP 112su Manual

Hide thumbs Also See for SP 112su:
Table of Contents

Advertisement

Problem
Paper gets wrinkles.
The printed paper is curled.
Images are printed diagonally to the
pages.
CER091

Removing Printing Jams

First, try removing the paper automatically. If this fails, remove it manually.
• Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made immediately after clearing a paper jam may be insufficiently fused and can
smudge. Make test prints until smudges no longer appear.
• Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
• Paper jams can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
Automatically removing the paper jammed inside the machine
1.
Open and close the maintenance cover once.
The machine will then slowly eject the jammed paper. After the jammed paper is ejected, remove it.
• Paper is damp. Use paper that has been stored properly.
• Paper is too thin. See page 19 "Supported Paper".
• If there are gaps between the paper and the paper
guides, adjust the paper guides to remove the gaps.
• Load the paper upside down in the paper tray.
• Paper is damp. Use paper that has been stored properly.
If there are gaps between the paper and the paper guides,
adjust the paper guides to remove the gaps.
Paper Feed Problems
Solution
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp 110suq

Table of Contents