Table of Contents
Advertisement
11.
If you want to remove a device from the Devices section, do the following:
a.
Click on the names of the devices to be deleted, to highlight them.
b.
Select
Remove Selected Devices
c.
On the Remove Devices window, select or deselect any devices on the list as desired,
then click
.
Remove
To remove all devices from the field, select
12.
Click
Begin
. The following indicators on the Firmware Loader window show the
progress of the update:
The Transfer Time section shows the remaining and elapsed time for the update.
•
The Total Progress section displays a progress bar with
•
In the Devices section, the Progress column displays an incrementing percentage
•
and another progress bar. The Status column displays
Figure 32.
Firmware Upload in Progress
13.
The upload is complete when the
column shows
100%
, and
field. Close the Firmware Loader window.
Status
Figure 33.
Firmware Upload Complete
from the
Edit
Remove All Devices
field shows
Remaining Time
Completed
is displayed above the progress bar and in the
SW DVI Plus Series • Remote Configuration and Control
menu.
from the
menu.
Edit
above it.
Uploading...
Uploading
.
, the Progress
00.00.00
30
30
30
Advertisement
Table of Contents
