Table of Contents
Advertisement
On the Add Device window, the path to the new firmware file is displayed in the
field.
Figure 30.
Path to the New Firmware File
10.
If this is the only device to which you are uploading firmware, click
switcher information is added to the Devices section of the Firmware Loader window
and the Add Device window closes.
If you will be uploading the firmware to multiple SW DVI switchers that are
connected to your computer, do the following:
a.
Click
. Your first device is added to the Devices section of Firmware Loader
Add Next
window, and the Add Device window remains open.
b.
For each additional device you want to add to the Firmware Loader window, repeat
steps 5 through 9, then click
c.
For the last device, click
the Add Device window.
Figure 31.
Firmware Loader Screen with an SW DVI Plus Added
Add Next
.
(instead of
) to add the device and to close
Add
Add Next
SW DVI Plus Series • Remote Configuration and Control
Path
Add
. The
29
29
29
Advertisement
Table of Contents
